iDRY Vacuum Kilns

Sponsors:

Pictures of Spline Joints in NC

Started by Jim_Rogers, April 11, 2007, 09:34:45 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Jim_Rogers

April 11, 2007, 09:34:45 AM
Recently I took a trip to North Carolina and had a chance to view some spline joints.

Disclaimer: All spline joints must/should be designed for the intended load by a qualified engineer.

Here are some photos:
















More next posting....

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Jim_Rogers

#1
April 11, 2007, 09:37:15 AM
Here are some more:

















Again each spline joint must/should be designed by a qualified engineer who understands the loads on it.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

Griffon

#2
April 12, 2007, 11:19:14 AM
Thanks for posting these Jim,

Those pendant-posts are quite something. I've never seen as many pegs in one spline end, and certainly never as many in one cluster.
Print
Go Up Pages1
User actions

Thank You Sponsors!