iDRY Vacuum Kilns

Sponsors:

Aqua II waterstove

Started by chipsfly09, February 24, 2009, 07:54:16 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chipsfly09

Does anyone have any info on Aqua II waterstoves-- I have 500 gal- has been working great for three seasons- very simple-- no draft fan etc--  Is the company out of business -- are there still parts out there?  Would like to find out.  2) Any suggestions on addative for water-- many different products out there--  most seem like  not much addative for a lot of water--  most in same price range  --What about used antifreeze if I can get it?

adin

I live on hwy 226 between Shelby and Marion  I bought this house with an aqua 2 waterstove.  It is working fine but I have no info on it either.  Did you ever get any info? 

bandmiller2

Chips,is that a closed system or open??Additives depend on your local water,when I ran my power boiler on the mill I used soda ash because our water is acid.If its a closed system and you don't add much water the water will soon become"dead" and not corrode the system.If you must keep adding water that raw water will eat boiler steel until it neutrilizes itself.Ask at a local plant or school what they add to their water and use that stuff.Frank C.
A man armed with common sense is packing a big piece

chipsfly09

Never did get anymore info-- have not checked posts on this topic as you can see for quite a while-- Hope all is well on 226 and your stove is cookin.

Thank You Sponsors!