iDRY Vacuum Kilns

Sponsors:

Twisted tree

Started by sixteenacrewood, June 18, 2011, 06:45:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sixteenacrewood

Hi Everybody
Have any of you ever milled a twisted log?
In some trees you can see in the bark where the tree has twisted, the spiral ,like a barber pole, is visable in the bark.
Have any of you ever milled a log like this? and if so, how does the wood react while drying? and what does the grain pattern end up looking like?

I know this is a dumb question but I am really curious.

Thanks
Stephen

beenthere

Not a dumb question.
The twist visible in the tree/log will likely result in twist of the product (lumber, cant, square) when it dries.
Posts will also twist when the wood dries. A common problem with electric poles, as the cross arms will twist as the pole dries, and sometimes break the wires.
A search on the forum will bring up some prior discussions.
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

Norm

I've milled a couple and they warped some while drying. Mine was black cherry so I figured I'd cut them extra thick so they'd clean up after drying.

pineywoods

Twisted pine logs make 2X6's that look like a propeller.
1995 Wood Mizer LT 40, Liquid cooled kawasaki,homebuilt hydraulics. Homebuilt solar dry kiln.  Woodmaster 718 planner, Kubota M4700 with homemade forks and winch, stihl  028, 029, Ms390
100k bd ft club.Charter member of The Grumpy old Men

Thank You Sponsors!