iDRY Vacuum Kilns

Sponsors:

Selective tree removal-how to sell?

Started by Dogyeller, July 14, 2011, 07:09:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Dogyeller

Please excuse my ignorance, but I figured this would be the place to ask my question.
I have 7 acres in the Oregon Cascades that could use some selective thinning of firs. I love the timber, but I can see where thinning a few (approx 20 trees) would give others some room to grow.  Also, I would hope to be able to sell them rather than cut them up for firewood.  Where do I start, who do I contact about harvesting/selling?
I thank anyone who takes the time to respond with a helpful guide.

beenthere

Welcome to the forum.
A lot will depend on how easy it will be getting the trees cut and the logs out.

Is there an easy way? Or will it require road building, cables strung, etc.?  Can you give us a ballpark idea?

Talking to a local forester would be an early route to take. They will know the logging situation, the log markets, and the species of enough value to move loggers in and logs out. For so few trees and small land area, could be a problem (and yet it could be easy for the right person).
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

Ron Scott

Contact your local Conservation District Forester, DNR Service Forester, or a Professional Consulting Foresterserviceing your area who is familiar with the local timber markets and values for your area. A local forester can best advise you as to how to best meet your objectives and if your 7 acres can produce a commercial timber harvest.   
~Ron

WDH

20 trees is not a viable commercial harvest with logging equipment.  That is hardly one truckload of wood.  You need another plan than thinking that you can sell them. 
Woodmizer LT40HDD35, John Deere 2155, Kubota M5-111, Kubota L2501, Nyle L53 Dehumidification Kiln, and a passion for all things with leafs, twigs, and bark.  hamsleyhardwood.com

Mooseherder

You may want to consider harvesting the trees for lumber.
Do you have any type of structures  planned for the property?
You can hire a local Sawyer to have them milled for you.

wesdor

How close are you to Kelso.  I've worked with a forester that has been in the business for more than 40 years. He runs a small consulting / forestry business called Tickle Creek forestry

In addition one of the bigger players that might suggest someone is Gustafson Logging. I only know Claey Gustafson and his wife but they are also quality people.

Just not sure if either is close enough for you

Welcome to the forum and good luck

Dogyeller

Thanks to all of your for your responses.  I realize that 20 trees is not much, and I actually believe more should be taken out in order to open up the area allowing for the growth of younger trees. A few are old growth that could be a danger to the house.   
The trees are all easily accessible, so no roads would need to be punched. I just didn't know how to start, but you have all been very helpful and I do appreciate your comments.

I am up in the Cascades above Oakridge, Oregon, so there is a lot of logging in the area and has been for years. My dad was a logger when I was a kid, but he has passed away (Jan.2011), and I bought this property after he developed Alzheimer's, so I was not able to ask his advise. 

Thanks again for your kind replies.

Thank You Sponsors!