iDRY Vacuum Kilns

Sponsors:

Chain suggestion

Started by DeerMeadowFarm, February 15, 2012, 02:56:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

bandmiller2

#25
March 19, 2012, 09:53:20 PM
In mr. Rodgers neighborhood when you run out of gas you should just about be out of oil,refill boath.I prefer not to let my saws run out of gas on a regular basis,wile short duration, it is a lean burn. Frank C.
A man armed with common sense is packing a big piece

John Mc

#26
March 19, 2012, 10:10:59 PM
Quote from: bandmiller2 on March 19, 2012, 09:53:20 PM
...I prefer not to let my saws run out of gas on a regular basis,wile short duration, it is a lean burn. Frank C.

A good idea. I usually shut down at the first sign it's running out. The exception is if I won't be running the saw for a while... then I run it dry, but at slower speeds and not under load.
If the only tool you have is a hammer, you tend to see every problem as a nail.   - Abraham Maslow

Clam77

#27
March 23, 2012, 11:15:06 PM
Mr Rogers was a Navy SEAL before he came up with his show...    8)
Andy

Stihl 009, 028, 038, 041, MS362
Mac 1-40, 3-25

shelbycharger400

#28
March 24, 2012, 11:30:20 AM
 :D :D :D
Quotestandard for oil is 2 tanks of oil for one tank of gas,      unless you have manual oilers,  or throttle linkage oilers

i never grease my bar tips!   they should get enough oil from the chain.   
must have  been a late night post
its 2 tanks of gas to one tank of oil.   
unless its my deere 50v...lol
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!