iDRY Vacuum Kilns

Sponsors:

RPM's

Started by Lnewman, December 27, 2013, 05:12:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

ladylake

#25
May 05, 2014, 06:47:35 AM

Both HP and torque fall off fast when running faster than the peak HP RPM on a stock saw, your just making noise when running  faster.  Ported saws will make peak HP at a little higher RPM, most port for more  torque not a finicky high RPM that is best left for race saws.   Steve
Timberking B20  18000  hours +  Case75xt grapple + forks+8" snow bucket + dirt bucket   770 Oliver   Lots(too many) of chainsaws, Like the Echo saws and the Stihl and Husky     W5  Case loader   1  trailers  Wright sharpener     Suffolk  setter Volvo MCT125c skid loader

bandmiller2

#26
May 05, 2014, 07:18:55 AM
I use both methods ear and my Stihl tach. Once you get the saw running sweet put the tach on it and write the RPM's on the shop wall. Most folks that badmouth tachs are too cheap to buy a good one. Frank C.
A man armed with common sense is packing a big piece
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!