iDRY Vacuum Kilns

Sponsors:

Hot Rod shop

Started by Peter Drouin, December 12, 2021, 05:47:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Peter Drouin

Did 12 square 6 hrs with one other guy. 


 

 
Going to run up the chimney some. 


 

 
Do the rest Monday. 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

newoodguy78

That's quite the chimney. Nice job with the shingles. 

moodnacreek

Quote from: newoodguy78 on December 12, 2021, 06:09:05 PM
That's quite the chimney. Nice job with the shingles.
I just had a drink and that chimney?

Jeff

Need a mustang for that stable? ;)
I can change my profile okay. No errors. If you can,t remove all the extra info in other fields and try.

Peter Drouin

If no wind, the smoke will spin coming out.
I have a lot of work to do on the shop. And trying to get a timber frame cut and done. I have another one to bid on too.
I'm so far behind on sawing.
But I have to get the Hot Rod out of the wood shed and in it's new home. Work gets in the way.
I have big plans for the shop.
And tooling I want. 
 Maybe another Hot Rod in the works.
34 Chevy pickup If I can talk him out of it.
People In NH love to not part with things.
Have a man less than a mile from me has his 30 ac full of stuff rusting away. And I can't buy a thing. No matter how much $$$$$ I have. :D
Come on summer.


 


 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

Quote from: Jeff on December 12, 2021, 08:58:28 PM
Need a mustang for that stable? ;)


Na. I want a fast Hot Rod. ;) :D
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

Quote from: moodnacreek on December 12, 2021, 08:51:20 PM
Quote from: newoodguy78 on December 12, 2021, 06:09:05 PM
That's quite the chimney. Nice job with the shingles.
I just had a drink and that chimney?


Is what I was in another life. I can build anything with Brick- block or stone.
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

newoodguy78

Wood and roofing materials was my medium for years. I very much respect the work that went into the chimney and the shop. 

thecfarm

Can't say I have ever seen a chimney like that.
Nice cover for the hot rod.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Jeff

Quote from: Peter Drouin on December 12, 2021, 09:02:30 PM
Quote from: Jeff on December 12, 2021, 08:58:28 PM
Need a mustang for that stable? ;)


Na. I want a fast Hot Rod. ;) :D
I think its been scientifically proven that if we push them  both off a cliff at the same time, it would end in a dead heat.
I can change my profile okay. No errors. If you can,t remove all the extra info in other fields and try.

Bruno of NH

The shop is looking good Sir
Lt 40 wide with 38hp gas and command controls , F350 4x4 dump and lot of contracting tools

Al_Smith

Very creative use of bricks and mortar .

hacknchop

You are a true craftsman , you do quality work and yes a ride like that deserves it's own place. The chimney looks great, I've had similar results on projects but never on purpose.
Often wrong never indoubt

Peter Drouin

A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

Peter Drouin

Roof done and boards up.


 
A&P saw Mill LLC.
45' of Wood Mizer, cutting since 1987.
License NH softwood grader.

samandothers

Great progress!  Dry from rain and snow is good. 

Thank You Sponsors!