iDRY Vacuum Kilns

Sponsors:

What are you cutting 2025?

Started by Ianab, January 04, 2025, 06:40:42 PM

Previous topic - Next topic

BargeMonkey and 1 Guest are viewing this topic.

PJS

@leeroyjd i figured there was something wrong with how much swing it's got to it! Now I know what to look at/for, it wasn't broke so I didn't know what needed fixing lol thank you!

@barbender they do suck! lol I can't even argue otherwise! At least now I can apologize to the truck driver in advance and tell him it will be better the next time!

I'll try out those tips when I get unstuck... currently hung up between two stumps in the mud lmao that's todays project 🤦�♂️ you won't find a harder critic on myself than myself lol I've been cursing all night at my stupidity  ffcheesy I should a known better, but I tried it anyways!Dummy!.... You aren't kidding about aspen/poplar whatever it's called, I had some on the bunk and now they're underneath the machine as they slid right off in my current predicament ffwave  And yes I got it all on video, so you'll be able to laugh at/with me ffcool

Hindsight, I should really have used all the dead stuff to make a makeshift crane mat to crawl around on

@Plankton Im starting my AZ (CDL) license training next week, there's a shortage of drivers and the ministry of labour covers the funding if you can prove there's a demand for the job and you're laid off, so I'll have all 3 under my belt in the distant future! Any harvesters tips and tricks I am all ears!

@thecfarm yes lots of softwood, have some good sections of hardwood, but it all desperately needs attention, last time it was touched was the 80s, some days I'm taking out more dead trees than live trees. The goats love it! Oddly enough, they're eating all the bark first right now before the needles. I'm not entirely sure the reasoning! Pollen perhaps? It's the opposite in winter. They love leaves, had a maple blow over last fall in their pasture, it was picked clean in a couple hours.

olcowhand

Quote from: thecfarm on May 08, 2025, 08:49:46 PMI would feed the goats an armful of leaves when there was snow on the ground.
Ray,
I used to have a Boss that would say this about "Iffy" hay: "It will look a lot greener against a snow bank....."
Olcowhand's Workshop, LLC

They say the mind is the first to go; I'm glad it's something I don't use!

Ezekiel 36:26-27

barbender

Greased aspen pile on the right😊
Too many irons in the fire

SwampDonkey

Fresh cut aspen tops are even slippery with the bark on. I always wear chaulk boots in that stuff so my feet will stay under me.  ffcheesy

Today the tree composition changed from hardwood, to fir-aspen, to alders on a 40 m wide strip 100 m along. I cut a whack of beaked hazel on the front, but that ran out when the hardwood ended. This place is full of areas of trash shrubs. Some places they musta cut a lot of cow shade spruce by the looks of the limb piles.  ffcheesy
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

BargeMonkey

Not enough hours in the day. Lost swing gear seal right before I had to clean a job off, it happened but wasn't pretty. Messenger_creation_7DF49304-A5B4-479B-99B6-B3B538E6CB38.jpeg
Messenger_creation_DF8AC3DB-B742-4C7B-8CDB-96579F5262DF.jpeg
  I get almost done with one project and into the fire I go again. I've got a couple ponds to do, nothing wrong with a 10k series 6. Bought it right.
Messenger_creation_B0406076-B903-4EFD-BADD-586A7EBF393C.jpeg
 Baby Grace showed up without issue Thursday night, eats and sleeps well, everyone's healthy.
FB_IMG_1747103286228.jpg

SwampDonkey

Congrats with the new baby.  ffsmiley
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Old Greenhorn

Well forget the equipment and the lined up jobs, congratulations on Baby Grace, she is a charmer! Best of health to her and Momma!
Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way.  NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Magicman

I like boat pictures but I LOVE baby pictures.  smiley_love
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

beenthere

Congrats on the arrival of Grace Ann
ffwave ffwave ffcool ffcool
south central Wisconsin
It may be that my sole purpose in life is simply to serve as a warning to others

Thank You Sponsors!