iDRY Vacuum Kilns

Sponsors:

Bangor Maine Woods Expo

Started by thecfarm, May 04, 2025, 10:56:09 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

thecfarm

Does cost $10 or $15 at the day of show, but it's worth it. 
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

woodman

I will be at the woodmizer tent 
Jim Cripanuk

thecfarm

I will be all over the place wearing my FF hat.  :wacky:
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Mooseherder

I'm going to try and be there Friday opening time and probably leave early afternoon. 

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Mooseherder

Kevin from Logrite and I had a chance meeting at a fuel station off I95 this afternoon.   ffwave

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

thecfarm

I am back and did not even get wet!!!!
Was a very light mist most of the time I was there.
Then it stopped. 
I left around 2 and hit a heavy mist about 10 minutes away. Then it started to rain.
I had a good time seeing Logrite Kevin and saw woodman at the WM tent.
Seemed to be a smaller show this year. Not a lot of big equipment in motion.
Last time I went 1000hp chippers and tub grinders was making chips. 
No excavators splitting wood and stumps either.
I didn't even get any free hats or shirts this year!!!!
I even had to go through a metal detector.
But had a good time.
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Thank You Sponsors!