iDRY Vacuum Kilns

Sponsors:

Tooth setter

Started by pasbuild, November 03, 2005, 10:42:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

pasbuild

November 03, 2005, 10:42:14 PM
I want to make a tooth setter for my band blades, I know that a few of you have made your own and I was hoping you might share a few pics and maybe some details to make my job a little EZer.
If it can't be nailed or glued then screw it

chet

#1
November 04, 2005, 12:10:37 AM
Yer welcome ta come ta Iron River and copy mine.  ;)
I am a true TREE HUGGER, if I didnt I would fall out!  chet the RETIRED arborist

pasbuild

#2
November 04, 2005, 12:58:19 AM
Tanks Chet, how about we meet half way I'll buy ya breakfast, eggs and TATERS ;)
If it can't be nailed or glued then screw it

Larry

#3
November 04, 2005, 08:27:06 AM
Old thread with a little info.

https://forestryforum.com/board/index.php?topic=1592.0

Chet's got a good idea...setters are easy to make...just takes little time.

Larry, making useful and beautiful things out of the most environmental friendly material on the planet.

We need to insure our customers understand the importance of our craft.

edsaws

#4
November 04, 2005, 04:06:27 PM
heres a pic of the of the one I made
heres another view.

Its 2 pcs. of angle iron welded together then 2 short pcs attached on top w/ one kept loose that the toggle clamp pushes on to clamp the blade to check the set w/ the indicator. It aint pretty but it works. I also plan on adding a advance lever of some sort.
Print
Go Up Pages1
User actions

Thank You Sponsors!