Author Topic: chainsaw pants (Read 3738 times)

keppoch · « **on:** April 09, 2009, 01:45:05 PM »

I am trying to find chainsaw safety pants,not the chaps or the ones that that are protected front and back ,just the ones with protection on the front. I live in Nova Scotia Canada.Does anyone have any info where I can get a pair, or pads that I can sew in a pair of regular pants.

jander3 · « **Reply #1 on:** April 09, 2009, 02:32:01 PM »

from www.schooloflogbuilding.com:

After trying out many kinds of saw-resistant safety trousers, some of them heavy or clumsy, along comes the Timber Savage Three-Season - comfortable, light, and less than $50. Pants are available at wholesaler Ahlborn Equipment in Wisconsin. However, you need a business name to buy from them - 800.472.7600. Tamarack may also have the pants in the near future - 763.783.9773.

timber tramp · « **Reply #2 on:** April 09, 2009, 03:16:09 PM »

Madsens has jeans that accepts the pads, they have the pads as well. Made by Labonville I think. :)TT

chevytaHOE5674 · « **Reply #3 on:** April 09, 2009, 04:31:20 PM »

I have a pair of stihl pants, and love them but they are pricey . I also have a pair of timber savage pants and they are great, but somewhat heavy and warm.

I also have a pair of jeans and carhartts with labonville pads and they are very comfortable, but only offer front protection.

arojay · « **Reply #4 on:** April 10, 2009, 10:41:58 PM »

I have had two pairs of Husqvarna pants that they call "Ontario Summer Pants". They are made of a light material and only have Kevlar on the front. I got them from a Husqvarna dealer. You may have to order them because they aren't approved by big brother in all provinces.

John Mc · « **Reply #5 on:** April 11, 2009, 11:56:09 AM »

I ordered some Husqvarna "arborist" summer pants a couple of years ago. Ordered them in part because the ones I saw a friend using had mesh pocket liners. In warmer weather, he got extra ventilation by unzipping the pockets. He said the extra air flow through the mesh pocket liners was very noticeable.

Unfortunately, when mine came in, they had regular fabric pockets. An email to Husqvarna asking about the change and whether they still made any with the mesh pockets went unanswered.

Hilltop366 · « **Reply #6 on:** April 11, 2009, 04:01:34 PM »

Hi fellow bluenoser where in NS are you.
Joey Muise Small Engine Repair in Concession, it's in Clare area of SW NS has some light weight pants he gets made in Quebec they seem to look good but I havent tried them yet.
Maybe its too far from you, but you can give him a call he will try to help you out I'm sure. He has all the other stuff you need to cut wood and loads of used parts as well.

keppoch · « **Reply #7 on:** April 14, 2009, 10:17:02 PM »

Hi Hilltop
I live in Antigonish,NS how do I go about getting in contact with the guy

Hilltop366 · « **Reply #8 on:** April 14, 2009, 10:30:00 PM »

Hi give him a call 902-769-0266
Not sure of his hours this time of year, try in the day time.

keppoch · « **Reply #9 on:** April 18, 2009, 12:12:20 AM »

Thanks Hilltop for the info, I was talking to him and and he is sending me a pair of chainsaw pants as well he has lots of saw parts and everything, this was a great find, so thanks again for your help.
Keppoch

Hilltop366 · « **Reply #10 on:** April 18, 2009, 11:47:48 PM »

Your quite welcome

Joey has a small shop well of the beaten path but loads of stuff including a 45' van trailer with shelves on both sides loaded with used saw parts for those looking for such stuff, along with the new stuff.

Forestry Forum
Sponsored by: