Timber Framing Tools for Sale

[Jim_Rogers]

(Updated 11/29/10-PM-3252)
(Photo gallery was updated 4/9/10-AM, with 4 photos of tools)
Here is a list of tools currently available for sale.

These tools have been cleaned, sharpen, honed, and "some" have had handles replaced with new strike end rings.

Tools for sale

Slicks

3 5/8"--No Name----------$205--2Y
3"-------Keller&Stocker----$195--3A
3 1/2"--Barton-------------$215--3B
3"------Beatty--------------$195--3D
3"------Duerey--------------$225--3H
2 5/8"--NoName------------$135-3i**+ (short handle)

Corner Chisels

1 1/8"--Cook--------$90--2w
1 1/4"-PS&Wilcox-----$80--3g
1"-----Hart------------$75--3h
1"-----Unreadable-----$90--3i
1"-----Hand-forged-----$65--3m
1"-----Douglas---------$105--3n


Framing Chisels

1/2"-----Mortising Chisel---------$80--3A
9/16"---Sorby (lock mortise type)--$75--4P
7/8"-----Pexto-----------------------$70--4X
2"-------Samson------------------------$90--6F
1"-------Stanley Socket bevel edge-----$40--6M-1
1"-------Stanley Socket bevel edge-----$40--6N-2
1 3/4"--PS&W--------------------------$80--6V
1 15/16"-Crossman--------------------$75--6X
1"-------Union (New Old Stock)--------$70--7A
1"-------Union (New Old Stock)--------$70--7B
1"-------Union (New Old Stock)--------$70--7C
1"-------Union (New Old Stock)--------$70--7D
1 3/4"--Hart-----------------------------$70-7E
2"------New Haven----------------------$95-7O
2"------AW Crossman-------------------$90-7P
3/4"---Paring chisel (no ring)------------$50-7Q**+ (not restored)
1 1/2" Paring chisel (no ring)------------$75-7R**+ (not restored)
2"----- Framing Chisel-------------------$85-7T**+ (not restored)
2"----- Framing Chisel-------------------$85-7U**+ (not restored)
2"----- Framing Chisel (no ring)---------$85-7V**+ (not restored)
1 1/2"-Samson--------------------------$85-7W
1 1/2"-PS&W----------------------------$95-7X
2"------Buck-----------------------------$100-7Y
2"------Underhill-------------------------$110-7Z
3/4"---Greenlee-------------------------$70-8A

We also sell new leather sheaths/tip protectors for the above chisels and slicks.

Here is a list of Sheaths currently available for sale.

Sheathes Price List 6-7-08

Plain Leather #102............... Sold out  
Plain Leather #102.5............. Sold out
Plain Leather #103................ $14
Plain Leather #103.5............. $18
Plain Leather #104................ $18

These are brand new.

I hope you will take advantage of this offer, these are nice leather sheaths.
If you would like a photo of a sheath, and your email program will accept pictures, I can send you one, just let me know. I have created an album and photos are there of all the sheaths. Here is a link to the album in my gallery:
Click here for link the Sheaths photo Gallery
1/24/09 The sheaths gallery has just been updated with new photos of the new sheaths.

Larger shots have been taken of each and they are available to be emailed to you.
All prices do not include shipping costs. Shipping to most areas is $3 for one sheath.
$4.95 flat rate box for up to three sheaths. More than three sheaths will require a shipping quote.

Draw Knives

10"-- Palmer(folding handle)----------$65-2H
8"--Greenlee(folding handle)----------$65-2i
8"----Nobles---------------------------$55-2K
8"----Union-Sampson-----------------$55-2L
10"--Jennings-Griffin-------------------$65-2M
6"--Unknown-curved scoop blade-----$35-M213**
6"--Buck Brothers-curved blade-------$75-M222**

Boring Machines

All boring machines have been cleaned, inspected, repaired if needed, and tested to insure that work properly, and have been oiled and are ready to bore holes.

Snell---------------$165-L4
Snell #788--------$235-O4
Ajax---------------$325-W4
Millers Falls--------$675-D5
Millers Falls--------$800-E5
Ajax---------------$335-F5
Ajax---------------$315-G5

Boring Machine Bits

All boring machine bits been cleaned, inspected, repaired if needed, sharpened and tested to insure they work properly, and have been oiled and are ready to bore holes.

1 11/16"-60-@$25
1 9/16"---7V-@$30
9/16"------8G-@$25
1 1/4"-----8Q-@$30
2 1/4"-----9M-@$25
1 1/16"---10K-@$25
1 3/8"-----10P-@$30
11/16"----10S-@$25
11/16"-----11U-@$35
5/8"--------11X-@$35 Swan
1 3/4"------11Y-@$30
1 3/4"------11Z-@$30 Ajax
1 1/4"------12W-1-$25
1 15/16"---12X-2-$25
1 15/16"---13J-14-$25
3"-----------13Q-A-$50
1 3/8"------14H-E-$30
1 1/2" Ajax-14S-$25
1 1/2" Ajax-14T-$30
1" Ajax-----14U-$30
1 1/4"------14W-2-$25
2"----------15E-D-$35
1 1/2"------15F-E-$35
1 1/2"------15i-1-$30
1 1/2"------15J-2-$30
1 1/2"------15K-3-$30
1"-----------15L-4-$25
1 1/16"-----15M-5-$20
2"-----------15N-1-$35
2"-----------15T-B-$40
1"-----------16B-i-$40
2"-----------16M-B-$40
1"-----------16P-E-$40
1"-----------16Q-F-$40
1"-----------16R-G-$35
1"-----------16S-H-$30
15/16"------16T-i-$25
2"-----------16U-1A-$40
1"-----------16W-3A-$35
1"-----------16X-A-$40
1 1/4"------16Y-B-$35
1 1/2"------16Z-C-$25
1 1/2"------17A-D-$40
2"-----------17B-E-$40
2"-----------17C-F-$30
2"-----------17D-G-$40
1 7/16"-----17E-1-$20
2"-----------17F-2-$35
1"-----------17G-3-$35
1"-----------17H-4-$30 (long shank, new)
1 1/2"-------17i-5-$35
9/16"--------17J-$10 (short Jennings style 8 to 8 /12" long)
11/16"-------17K-$10 (short Jennings style 8 to 8 /12" long)
11/16"-------17L-$10 (short Jennings style 8 to 8 /12" long)

Misc.

Spoke shaves, other planes and other tools:
Stanley #26 Jack Plane-----$45--M39
Craftsman #6 plane----------$70--M75
Jim's Slider----------------------$49--M86**
Bit brace----------------------------$15-M129**A
Bit brace----------------------------$15-M129**B
Bit brace----------------------------$15-M129**C
Bit brace----------------------------$12-M130**
Bit brace----------------------------$15-M131**E
Bit brace-----------------------------$7-M134**B
Strop (for sharpening)--------------$10-M135(NEW)
10" Bit Brace------------------------$22-M139
Stanley #102 block plane-------------$20-M143**(as is, not restored)
13/16" Rabbet plane-------------------$30-M147**
1 1/4" Rabbet Plane---------------------$30-M155
Race Knife-------------------------------$50-M178**
Base for Millers Falls boring machine(Cherry)-$85-M180(NEW)
Broad Axe Handle ----------------------------$20-M184A(NEW)
Auger bit handle-PS&W-------------------$15-M185
T-Handles 4 augers (wooden, 12 on hand)-$2-M187A-L ($2 each)
Race Knife---------------------------------$50-M188**
Jack Plane #5-Stanley-Baily Pattern-------$70-M194(NEW)
Jack Plane #5-Stanley-Baily Pattern-------$70-M195(NEW)
Stanley 151 blade only---------------------$15-M196**
Stanley 151 blade only---------------------$15-M197**
2 1/2" T-Handle auger---------------------$50-M198
9" Dividers---------------------------------$20-M200**
Stanley Plane #45 (with cutters)-----------$185-M202** (11-straight-2-3/16, 1/4, 5/16, 2-7/16, 1/2, 5/8, 3/4, 7/8, 1 1/4") and (7 beading cutters #21, 22, 23, 24, 25, 26, 27)
Adze handle (New #1 grade Hickory)-----$18-M204 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M205 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M206 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M207 (Flame hardened)
Adze handle (New #1 grade Hickory)-----$18-M208 (Flame hardened)
2" Wooden rabbet plane "Roberts"-------$30-M211
4 1/2" Dividers-----------------------------$15-M216**
13 Irwin bits for brace, in a box case-------$84-M217** (#4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, a slotted screw driver and a counter sink reamer)
5" Heath caliper------------------------------$10-M224**
5" Starrett caliper------------------------------$10-M225**
4" no name caliper------------------------------$10-M227**
Stanley #55 spoke shave------------------------$26-M233**
Wooden Dividers---------------------------------$32-M234**
21" Dividers--------------------------------------$60-M240**
Spoke Shave 151 style-round bottom----------$30-M241** (new)
Spoke Shave 151 style-flat bottom-------------$35-M242** (new)

Bit and Brace Bits:
7/16” Shell Auger-$10-6G
5/8” Shell Auger-$10-6H
11/16” Ships Auger-$15-6i
11/16” Ships Auger-$15-5J
11/16” Ships Auger-$15-5K
11/16” Shell Auger-$15-5L
7/8" Shell Auger-long shank for boring machine-$10-16C**
1"---Shell Auger-long shank for boring machine-$10-16D**
7/8" Shell Auger-long shank for bit brace--------$10-16E**
1"---Shell Auger-long shank for bit brace--------$10-16F**
1"---Shell Auger-long shank for bit brace--------$10-16G**
11/16"-Shell Auger-long shank for bit brace--------$10-16H**
3/4"--Spur Auger-long shank for bit brace--------$30-16J**
1 1/8"-Spur Auger-long shank for bit brace--------$10-16K**

I hope you will take advantage of this offer, these are nice tools.
If you would like a photo of a tool, and your email program will accept pictures, I can send you one, just let me know. I have created an album and some of the tools have photos there. Here is a link to the album in my gallery:
Click here for link. Larger shots have been taken of each tool and they are available to be emailed to you.
All prices do not include shipping costs.

Jim Rogers
Vintage Tools NE

The id letter/number system after each tool price is my personal system to keep track of which item is which..

[bushhog920]

I am planing on building some timber frame sheds and maybe a small home in the near future. All this is new to me but doing alot of research to make sure it's done right. I will be using mainly pine what would you suggest a good starter set would contain?

[Jim_Rogers]

Bushhog920: Welcome to the forum. If you go to the timber framing section, right at the top of the list of posts, is a thread that contains a list of tools for timber framing.
There is lots of information about tools in that section as well.

Check it out and then get back to me with what you'd like.

thanks for asking.

[mrowland]

I am looking for a Millers Falls boring machine and a 3" Witherby slick.  Are J4, K4, 3C or 3G still available?  -mrowland@beeline-online.net

[Jim_Rogers]

If they are on the list above then they are still available.
I'll send you some info via regular email.

Jim Rogers

[spenser]

Hello Jim,
I'm a new member and this is my first post, so let me get the requisite stupid question out of the way... If I want to buy any of the timber frame tools you offer, do we communicate thru the forum ?  Thanks for your time.

[Jim_Rogers]

Hello Jim,
I'm a new member and this is my first post, so let me get the requisite stupid question out of the way... If I want to buy any of the timber frame tools you offer, do we communicate thru the forum ?  Thanks for your time.

Spenser, welcome to the forum and it is best if you send me an email through the email system so that I can send you some tool buying info. Thanks. Jim

[CX3]

Hi Jim.  I would be interested in a tie axe/broad axe.  Something to hack ties.  What would you have?

Thanks Paul .

[Jim_Rogers]

Paul:
We don't have any broad axe heads on hand at this time.
We have one spare offset handle for a 1" by 3" eye available as the list shows.

There are many different size heads, I am currently looking for an 8" broad axe head for a customer.

What size do you want? And I'll try and find you one.

Jim Rogers

PS. send me a regular email via the email system so I can send you the standard information about buying tools from us.