Author Topic: Diamond chainsaw sharpening bits? (Read 3367 times)

Satamax · « **on:** October 04, 2011, 11:27:42 AM »

Hi everybody!

I usualy use a dremel type tool for sharpening my chains, with cylindrical stones. But the stones don't last much.

Has anybody tried something like this?

http://www.amazon.com/4-Size-Rotary-Diamond-Chainsaw-Sharpening/dp/B003U8UOBO

And is there some better ones than others?

Thanks a lot.

Max.

beenthere · « **Reply #1 on:** October 04, 2011, 12:23:59 PM »

Tried them, but nothing beats the file. Just seems there are no good short cuts.

There was a jig posted a short while ago that clamped on the bar, and a hand turned "file" accurately positioned to look like it would do a very good job. On the expensive side of $100 tho. http://www.timberlinesharpener.com/

Mentioned in this thread.
http://www.forestryforum.com/board/index.php/topic,53144.0.html

I see Bailey's (sponsor) now has the Pferd / Husqvarna Swedish filing guide which is the one I like to use. Has two rollers that hold the file at a consistent height on each tooth, and a guide to keep the rakers filed at the right height for softwood or hardwood. Look for part # HVA 50569 81 91 for a kit that works on 3/8 pitch chain.
http://www.baileysonline.com/

Forestry Forum
Sponsored by: