Author Topic: LT15 Wide, LT70 Wide, where's the Wide Edger? (Read 1915 times)

Dave Shepard · « **on:** April 26, 2014, 06:56:30 PM »

My LT40 cuts 28" wide, but my ED26 only has a 25" opening. Even if the flitch will fit, it only cuts 15" wide boards. It's time for a Wide Edger. It needs about a 40" opening to accommodate a 34" flitch, and still have room to line up the cut. I have to edge a lot of lumber on the mill because it won't fit in the edger.

GAB · « **Reply #1 on:** April 26, 2014, 07:38:37 PM »

That new edger is probably still on the drawing board.
Gerald

tule peak timber · « **Reply #2 on:** April 26, 2014, 07:49:11 PM »

Dave , look into a new or used SLR (straight line rip ) saw. You will need three phase power, and it is necessary to make two passes to catch both edges but it works for me.... cut any width you want. Rob

stavebuyer · « **Reply #3 on:** April 27, 2014, 05:12:17 AM »

Cooks...

customsawyer · « **Reply #4 on:** April 27, 2014, 12:21:32 PM »

WM makes one but it is green and about $35,000.

Dave Shepard · « **Reply #5 on:** April 27, 2014, 01:08:26 PM »

The E430, or whatever they are calling it these days? Yes, that would be ideal, especially the fact that both blades move.

4x4American · « **Reply #6 on:** March 23, 2018, 05:35:19 AM »

#gravedug

PA_Walnut · « **Reply #7 on:** March 23, 2018, 06:16:03 AM »

Love my Baker edger, but frankly when I am sawing big slabs on my 40Wide, I'd rather edge them there to lessen the weight when handling...oh, my aching back! $:-\$

Generally speaking, I also leave the BIG stuff live edged and allow the straight-lining choices to be made after drying, in order to squeeze every last 1/8" outta it!

WV Sawmiller · « **Reply #8 on:** March 23, 2018, 08:11:37 AM »

Forget the wide edger - I want a planer that will plane about 3' or so.

customsawyer · « **Reply #9 on:** March 23, 2018, 08:44:11 AM »

I just bought knifes for my 24" planer. No thanks on buying them for a 36" planer.

Southside · « **Reply #10 on:** March 25, 2018, 11:04:52 PM »

Riehl in Pennsylvania makes a wide one upon request.

Darrel · « **Reply #11 on:** March 25, 2018, 11:53:41 PM »

I believe Riehl makes one without special order that opens up wide enough to take the 28" wide flitch or slab but I think the widest board it will cut is 20" or so. It also has a max thickness of 3" which is more than the orange edger.

Forestry Forum
Sponsored by: