BLUECREEPER Poster Award #4!

The Forestry Forum is sponsored in part by:

0 Members and 1 Guest are viewing this topic.

I got a 13hp Honda engine on my homemade mill. My band wheels are 17" dim.My ratio is 5 to one . Hope this helps.Note.I need to run WOT so I don't get waves. So maybe 4 or 4.5 to one might be a little better.I wont change my mill because it's working great at WOT.Maybe someone can help me out. I not the best with math. But the way I look at it my blade is running at 4533fpm.3200RPM engine speed X 17 inch wheel divided X 12 to get feet = 4533... Right

KbeitzThe forum caculator has you at about 3000 fpm =/-. It is located at the toolbox icon at the bottom of all the adds on the left of your screen. It does the math for you and for me and I would be losts without these types of caculators.gww

I got a 13hp Honda engine on my homemade mill. My band wheels are 17" dim.My ratio is 5 to one . Hope this helps.Note.I need to run WOT so I don't get waves. So maybe 4 or 4.5 to one might be a little better.I wont change my mill because it's working great at WOT.Maybe someone can help me out. I not the best with math. But the way I look at it my blade is running at 4533fps.3200RPM engine speed X 17 inch wheel divided X 12 to get feet = 4533... Right

Quote from: Kbeitz on July 12, 2015, 11:46:57 AMI got a 13hp Honda engine on my homemade mill. My band wheels are 17" dim.My ratio is 5 to one . Hope this helps.Note.I need to run WOT so I don't get waves. So maybe 4 or 4.5 to one might be a little better.I wont change my mill because it's working great at WOT.Maybe someone can help me out. I not the best with math. But the way I look at it my blade is running at 4533fps.3200RPM engine speed X 17 inch wheel divided X 12 to get feet = 4533... Right 3200 engine rpm / 5 to one ratio = 640 wheel rpm17" dia wheel X 3.14 / 12 = 4.45 ft per revolution of wheel640 rpm x 4.45 ft/rev = 2848 ft/minAssuming that I understand your rig.

Did you guys notice me over here in the corner silently nodding my head in solemn agreement as if I knew what you were talking about?Numbers... I'm very glad there's so many capable members on this forum.

Started by VooDooChikin04 on Sawmills and Milling

Started by JoshNZ on Sawmills and Milling

Started by jay_d on Sawmills and Milling

Started by bugpeople on Timber Framing/Log construction