iDRY Vacuum Kilns

Sponsors:

Detroit 353 wont crank

Started by Plankton, January 05, 2016, 05:48:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

OntarioAl

#25
January 25, 2016, 07:57:16 AM
brianj
The quote is actually from Ohiobill.
I have always rebuilt my own starters and alternators.
An old hand at automotive electrical shop where I purchase the required parts advised me to run a dedicated ground from the battery to the starter.
Al
Al Raman

polemidis

#26
November 09, 2019, 01:53:05 PM
I took the started off the detroit 353 out because It wouldn't crank.
Can you please help me on how to proceed? I just got the machine and while it had hard time to start it always did after 10-30 trys....  :-X

a) When I connect the 2 big lugs to 12V, the gear turns but,
b) when I connect the small lug to the big lag that has 12V from the battery, The gear moves up,  but does not turn. Is it something that I could fix or should I find a repair shop?

I would prefer to get my hands dirty if it can get fixed :) 
When me works, me works hard.
When me stops to think, me falls asleep.
Print
Go Up Pages 1 2 All
User actions

Thank You Sponsors!