Hello and thanks for accepting me. Primarily raise cattle, got some land recently that needed clearing. Someone convinced the bossman to get a hydro ax instead of us just clearing it with a dozer. Machine had a Fecon mulching head on it. We switched it to a bush hog head, researched and confirmed that...
So this is going to take me some time. I need to build a website and integral to that is telling the story of my product. I thought about making a manuscript, editing, revising, revising... but I think it will be more fun to share it and get feedback from the friendly crowd here. I have been learning...
This is so weird. A couple times recently I have had my hour meter run while I have the key off and out of the machine. I now have about 75 hours of run time that never happened.
Anybody ever hear of such a thing?
Anybody ever hear of such a thing?
Hello,
I bought a used Tigercat 720G fellerbuncher. I have been having issues with the saw kicking on to full speed to cut. It will engage but runs very slow. If I bounce the head for a while it will finally engage at full speed. It could be instance, 15 minutes, or 40 minutes of bouncing the head for it to fully engage.Read More
I bought a used Tigercat 720G fellerbuncher. I have been having issues with the saw kicking on to full speed to cut. It will engage but runs very slow. If I bounce the head for a while it will finally engage at full speed. It could be instance, 15 minutes, or 40 minutes of bouncing the head for it to fully engage.
Does anyone have a Simonds or Nicholson PN# for the flat file with rounded safe edges for face sharpening the tooth face?