Hello, I found this post for a router sled https://www.lumberjocks.com/threads/router-jig-for-flattening.360819/
and the first post from Ljohnsaw caught my eye. Does anyone know where I can find the wheels he's using for his sled?
I have several pine trees I plan to fell. Due to their location I need to attach a felling rope to ensure direction of fall. Can anyone tell me the best way to get a rope up a tree with no limbs. The Finnish Lumberjack on YouTube uses a tool that is a spring loaded grapple that mounts on a telescoping...
I finally figured out the origin of the humboldt cut/face when felling timber. Go ahead and make fun of me, I don't care.
For some background, I am a retired logger/sawyer who worked in northeastern/mid-atlantic timber all my life, primarily hardwoods. I did cut a little pine here and there. The vast majority of the timber I cut was less than 30" dbh. I logged with cable skidders and forwarders. I felled timber with chain saws and a conventional/open face notch.Read More
For some background, I am a retired logger/sawyer who worked in northeastern/mid-atlantic timber all my life, primarily hardwoods. I did cut a little pine here and there. The vast majority of the timber I cut was less than 30" dbh. I logged with cable skidders and forwarders. I felled timber with chain saws and a conventional/open face notch.
I have had Woodmizers for over 30 years and never have ask this. I just ordered a Drive Belt and with shipping they charged $227.00
This for a belt seems wrong. Has anyone found the replacement number not Woodmizer for this belt.
wm # 3/5VXFL975
This for a belt seems wrong. Has anyone found the replacement number not Woodmizer for this belt.
wm # 3/5VXFL975
My setter manual does not list the tooth count for 171" blades for LT50.
I calculate 194 teeth. Is that correct?
My setter (Woodmizer BMT250) hasn't been counting correctly. I've been marking the weld and just watching it to get it to stop.
Obviously, the switches for programming...
I calculate 194 teeth. Is that correct?
My setter (Woodmizer BMT250) hasn't been counting correctly. I've been marking the weld and just watching it to get it to stop.
Obviously, the switches for programming...