Need Homelite Sprockets:

[Lewis Brander]

Hello to all. I'm in a bit of a pickle. I have 3 Homelite saws, models, 600 D, C-5 and C-51. Thay all take the same sprockets and would like to replace them with either the standard spur or rim systems. Here are the measurements of what I'm looking for. Drum ID  3.10", shaft size 9/16" or .563", .404 pitch, 7 toooth sprocket. If I had to I could go with the 3/8 pitch, but would have to go with .063 gauge chain tp fit the bars, which is not very popular in this area. I would appreciate any help, comments or suggestions from this site. The saws are restored and painted and would like to get them so that I can demonstrate them. Thanks. Lewis.

[Kevin]

Maybe here ...

tiltonequipment

[Shannon_Billman]

If any one can help you on homelite parts.here is a name and number" Hawkins brothers 573-588-4731 . I was getting a little discouraged till I attained this number from a freind ,Hawkins has had every part I have needed for my 600D xl2100 xl925 and my old zip . They were a big homelite dealer years ago .good luck.

[Lewis Brander]

Hello to all. I ordered the sprockets and new chains from Jeff Sikkema. His website is: www.snssawshop.com. He has some really good prices on sprockets and chains.

Kevin, I'll save the link you provided for futrue refference. Thanks.

Shannon. I have an old Homelite, 5-20, that needed a coil. I got one from Hawkins Brothers (an NOS coil). I talked to L. Sam Hawkins and he seems like a real great guy to talk to. They also have great service, had the coil in 3 days and the saw now runs great.

Thanks to all for your replies. I appreciate them. lonebear30.

[Shannon_Billman]

Glad I could help!