iDRY Vacuum Kilns

Sponsors:

Timbco Saw heads.

Started by BargeMonkey, April 14, 2015, 10:27:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

BargeMonkey

April 14, 2015, 10:27:29 PM
having oiler troubles on my barsaw head, its not junk in a line, oil holes are good and it isnt the bar. Anyone been down this road before i dive too deep into it ?

timbco68

#1
April 14, 2015, 10:42:45 PM
it's been awhile since we had one but 1st check both check valves on the oiler.Most of my problems were in one of the 2 check valves.9 times out of 10 the problem will be there.Had some dirt or bark float over the oiler tank outlet and give problems too.Good luck.

BargeMonkey

#2
April 14, 2015, 11:00:56 PM
thank you, planned on tearing into it when i got home.

lopet

#3
April 14, 2015, 11:44:23 PM
Did you get another Timbco ?
Make sure you know how to fall properly when you fall and as to not hurt anyone around you.
Also remember, it's not the fall what hurts, its the sudden stop. !!

BargeMonkey

#4
April 15, 2015, 08:40:10 AM
Quote from: lopet on April 14, 2015, 11:44:23 PM
Did you get another Timbco ?
Only sold that big grapple i had this winter. Got a whopping 4601 hrs on the Timbco now, getting to be a high hrs unit.  :D
Print
Go Up Pages1
User actions

Thank You Sponsors!