iDRY Vacuum Kilns

Sponsors:

Old iron whatzit.

Started by Dave Shepard, April 20, 2016, 04:26:06 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Dave Shepard

Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Woodhauler

2013 westernstar tri-axle with 2015 rotobec elite 80 loader!Sold 2000 westernstar tractor with stairs air ride trailer and a 1985 huskybrute 175 T/L loader!

drobertson

only have a few chain saws I'm not suppose to use, but will at times, one dog Dolly, pretty good dog, just not sure what for yet,  working on getting the gardening back in order, and kinda thinking on maybe a small bbq bizz,  thinking about it,

isawlogs

 Hydraulic railway spike driver....
A man does not always grow wise as he grows old , but he always grows old as he grows wise .

   Marcel

Dave Shepard

Not a spike driver. That is an air compressor run by a 50 HP electric motor.

Not for cutting granite slabs, but take note if the marble in the yard.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Woodhauler

Quote from: Dave Shepard on April 20, 2016, 08:01:40 PM
Not a spike driver. That is an air compressor run by a 50 HP electric motor.

Not for cutting granite slabs, but take note if the marble in the yard.
polishing marble slabs
2013 westernstar tri-axle with 2015 rotobec elite 80 loader!Sold 2000 westernstar tractor with stairs air ride trailer and a 1985 huskybrute 175 T/L loader!

thecfarm

Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Ljohnsaw

An edge shaper for the slabs?  (like a router)
John Sawicky

Just North-East of Sacramento...

SkyTrak 9038
Ford 545D FEL
Genie S45
Davis Little Monster backhoe
Case 16+4 Trencher
Home Built 42" capacity/36" cut Bandmill up to 54' long - using it all to build a timber frame cabin.

47sawdust

Not sure what it is but it looks like it is about the right size for Loggah to add to his collection of ''light'' antiques.
Mick
1997 WM Lt30 1999 WM twin blade edger Kubota L3750 Tajfun winchGood Health Work is my hobby.

sandhills

What the heck, I'll guess, is it used to make headstones  ???

Texas Ranger

Rail road wheels on it, track grinder
The Ranger, home of Texas Forestry

sandhills

I noticed that too but now it's set up stationary?  At one time or another it had to have something to do with rail roads.

Dave Shepard

It is used in the marble industry. It moves on railroad tracks, but has nothing to do with railroads.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Hilltop366


Dave Shepard

Part of it reciprocates, but it's not a saw.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Ljohnsaw

Quote from: Dave Shepard on April 21, 2016, 05:51:25 PM
Part of it reciprocates, but it's not a saw.

So either a reciprocating drill (hammer drill) or a power chisel to finish the edges on the marble (rough cut look)?
John Sawicky

Just North-East of Sacramento...

SkyTrak 9038
Ford 545D FEL
Genie S45
Davis Little Monster backhoe
Case 16+4 Trencher
Home Built 42" capacity/36" cut Bandmill up to 54' long - using it all to build a timber frame cabin.

Dave Shepard

It's sort of a chisel. Not used to dress stone.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

landscraper

Stone splitter for when they saw out the big blocks and need to break them down into manageable slabs.
Firewood is energy independence on a personal scale.

Dave Shepard

This was used earlier in the quarrying process than that.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

bill m

For driving feathers and wedges for splitting large blocks off of the face.
NH tc55da Metavic 4x4 trailer Stihl and Husky saws

Dave Shepard

It's a channeler. It would cut a two inch wide groove down several feet. These grooves would be cut at 90 degree angles, forming blocks. The first block would get pried out somehow, then holes could be bored under the blocks so wedges could be driven under to break the block loose.
Wood-Mizer LT40HDD51-WR Wireless, Kubota L48, Honda Rincon 650, TJ208 G-S, and a 60"LogRite!

Thank You Sponsors!