New Member and new owner LT15

[Mentos]

Hey guys after 4 years of reading, i finally pushed the trigger on a brand new woodmizer LT15.

Assembly went well but this being a new Generation assembly plan's didn't match with what i had.

Plus i am missing the keys to start the engine, so i am wating impatiently!!

Meanwhile here's a pic



P.S. Sry for my english (I am from Quebec  ;D)

Jessy

[Slingshot]

Looks good, congrats and welcome.
Some of the small engines have a sort of universal key. May work with
a key from a riding lawnmower if you have one.





_______________________________
Charles in KY.......

[Savannahdan]

Ditto on the congratulations.  I also had the same problem a while back regarding keys and found a Kawasaki key from a Lesco walk-behind fit a Kohler motor.  It has Indak on the key. 

[WLC]

Congratulations!  I'll second the remarks on the key, Most small engines with electric start have an Indak key and they are universal.  My mill key will start my engine on the debris loader I use to vacuum up leaves in the fall and vice versa.  An old Snapper lawn mower has the same key as well as my Sears riding lawn mower.

[YellowHammer]

Congratulations on the mill.  That one is a workhorse. 

[Deese]

Congratulations and welcome to the Forestry Forum.

[Darrel]

Welcome! And congratulations on the new mill. You'll be sawing soon. Pictures of the first log sawn are a must.  8)

[thecfarm]

You will like it!!

[Mentos]

I gess its never too late to post picture. did cut few tree's to mill witch will be used to make a cover shed for the mill. Did mill few ugly cedar i had for firewood. Next time i will mill my maple logs i did cut this winter.

Yep this is my 1st setup is not the best, i gess ill have to look into more of you guys pictures ;)

[fishpharmer]

Mentos congrats getting your new sawmill operation up and running!! 

[nativewolf]

Nice tractor and trailer/loader!  make sure to add some armor, lights, glass, fuel tank, hoses!  Lots of good pictures of other members setups with tractors.  Many will be jealous of the loader.

[thecfarm]

Looks like a good size tractor you have there. How many hp?  Nice forwarder trailer you have there.

[Chuck White]

Congratulations on the new mill, and Welcome to the Forestry Forum!

[Mentos]

Tractor is a New Holland TS100

And thanks to all of you!

[Treehack]

I gess its never too late to post picture. did cut few tree's to mill witch will be used to make a cover shed for the mill. Did mill few ugly cedar i had for firewood. Next time i will mill my maple logs i did cut this winter.

Yep this is my 1st setup is not the best, i gess ill have to look into more of you guys pictures ;)

Wish I had your first setup problems.  Looks good to me.  Welcome to FF.

[wng-2]

Nice stuff! What part of Quebec?

[Mentos]

Beauce, im pretty close to jackman i usually go eat some pizza over there on summer ;P The woodlot is in St-Zacharie

[wng-2]

Beauce, im pretty close to jackman i usually go eat some pizza over there on summer ;P The woodlot is in St-Zacharie

Cool, I Ski-dooed in that area a lot years ago.