New blade wont stay on.

[Kwill]

I put a new woodmizer blade on today and it wont stay on . anyone ever had that problem. I put the old blade back on thst i sharpened myself and it stays on just fine. I took the new one off and put it back on several times with the same results. Just wonder if anyone had this issue.

[John Bartley]

You could try putting a long (three or four foot) straightedge along the back of the band at the weld and see if the band was welded straight.

[Kwill]

You could try putting a long (three or four foot) straightedge along the back of the band at the weld and see if the band was welded straight.

Ok will try that and see what it looks like

[terrifictimbersllc]

Or just see if it  lays flat on a concrete floor .