iDRY Vacuum Kilns

Sponsors:

Under squinted table with wedges scarf joint.

Started by rjwoelk, July 16, 2023, 05:18:55 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

rjwoelk

July 16, 2023, 05:18:55 PM
Looking for the layout deminsions of this scarf joint. The ones I have found  appear to be under squinted.
Also I may need to do a scarf joint on one sill, half lap over the foundation  blocks?
Lt15 palax wood processor,3020 JD 7120 CIH 36x72 hay shed for workshop coop tractor with a duetz for power plant

Jim_Rogers

#1
July 16, 2023, 05:44:45 PM
see attached:

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

rjwoelk

#2
July 16, 2023, 11:30:37 PM
Thankyou Jim. The pegs deminsions i should be able to figure out from the drawing or do they have a very specific size?
Lt15 palax wood processor,3020 JD 7120 CIH 36x72 hay shed for workshop coop tractor with a duetz for power plant

Jim_Rogers

#3
July 17, 2023, 09:26:06 AM
Pegs can be 1" in diameter.
Wedges can be hardwood and should taper to 3/4" in 8" for the slope.

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

rjwoelk

#4
July 17, 2023, 04:12:14 PM
Thanks Jim.
Lt15 palax wood processor,3020 JD 7120 CIH 36x72 hay shed for workshop coop tractor with a duetz for power plant
Print
Go Up Pages1
User actions

Thank You Sponsors!