iDRY Vacuum Kilns

Sponsors:

Do I give up?

Started by championyouk, October 17, 2023, 04:09:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

championyouk

I'm not being dramatic I swear. I own a fair amount of land and bought myself a Norwood sawmill. Everyone told me it was a gold mine my whole life so I believed it.
Last year I milled a bunch of spruce to learn my mill with a plan of cutting pine for big money. Big mistake.
Fighting the pine beetles and black marks appears impossible. I've tried a bunch of stuff and in the end I more or less lose half my boards. It's black right off my mill, I'm stickering my wood and trying for it not to happen trust me.
I keep trying to convince myself it will work out but when you have hundreds of black boards you're embarrassed of and hundreds of good ones from the middle everyone wants for free, its frustrating. I've tried planing them. I've tried spraying them with pine sol.  I've considered painting them. I've considered burning them. Any advice may help. Thanks.

Digger Don

I'm not the one you want advice from. They will be along a bit later. But, welcome to the Forum. I'd say don't be ashamed of it. It sounds like your boards have lots of character! One thing I've learned though, there is a lot more to turning logs into lumber, than it would appear.
Timberking B20, Magnatrac 5000, Case 36B mini excavator

SawyerTed

Welcome to the Forum.  

Sad to hear you are hitting some bumps getting going.  

There's bound to be something to do besides quit.  

Can you give some details regarding log handling and condition prior to sawing?   And can you give some details on how lumber is handled and stored off the mill?
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

terrifictimbersllc

Spruce is one of the most difficult woods to saw flat. 
Pine is easy.

It would be helpful to know your geographical location, this can be included in your profile.

Every sawyer sympathizes with the feeling to nuke the sawmill sometimes. 
DJ Hoover, Terrific Timbers LLC,  Mystic CT Woodmizer Million Board Foot Club member. 2019 LT70 Super Wide 55 Yanmar,  LogRite fetching arch, WM BMS250 sharpener/BMT250 setter.  2001 F350 7.3L PSD 6 spd manual ZF 4x4 Crew Cab Long Bed

Old Greenhorn

Welcome to the forum. I see you are brand new, so I wonder if you have done any reading here yet? Using the search tool can find you a lot of info related to your issue. Other folks will come along eventually to give you some solid info. But in order to do that, we will need a lot more detail. Photos will be very helpful. 
 Are you covering this wood after stickering? Are your stickers the same species as the boards. Is this black stuff present on the surfaces when you cut them? How Long have the logs been sitting before milling? The devil is always in the details. We need details because diagnosing over the internet is tough as it is, but without details, it's impossible.
 Whoever told you that sawmill is a gold mine had most likely never run and supported one. You can make good money, but you earn every penny. You can make a million with one, but you'd have to start with 2 million. :D The learning curve is steep. Read around here and you might save yourself a lot of grief down the road. 
 The smart guys will chime in when some of those details are revealed.
Tom Lindtveit, Woodsman Forest Products
Oscar 328 Band Mill, Husky 350, 450, 562, & 372 (Clone), Mule 3010, and too many hand tools. :) Retired and trying to make a living to stay that way. NYLT Certified.
OK, maybe I'm the woodcutter now.
I work with wood, There is a rumor I might be a woodworker.

Maximus

If you are doing it mostly for the money, I would give up.

If you are doing it mostly because you enjoy it -- the challenge, the smell and look of fresh wood grain, being out with nature, getting in touch with your land...  -- I would not give up.

But I would say that about any kind of work.  And while I am not an experienced sawyer, my experience is that whatever the endeavor, there are more significant challenges coming down the pike.

I was considering bee keeping:  I went to a class, and the highly experienced bee keeping instructor said, "Don't try this unless you can't not try this.  It's too hard.  It's too expensive.  There's too many failure modes.  You can only be successful at this if you can't not do it."  I do not have bees and I'm ok with it.

kkcomp

Welcome to the forum, what model Norwood did you get? I am by no means an expert but I do enjoy the milling. From your one picture it looks like you are doing ok but your stacking needs changed. For the black on pine or spruce just spray it with a mild bleach solution. Try covering you wood stacks to keep rain off of it too. Not a tarp a structure with a roof. 

Got to Youtube and watch every video on Hobby Hardwoods. Then watch the 5 or 10 more times. After that you may not be getting rich but you will make a much better product and enjoy yourself more.
Why is there never time to do it right but always time to do it over?
Rework is the bane of my existence
Norwood HD38 Kubota B3300HSU Honda Rancher many Stihl and Echo saws, JCB 1400b Backhoe

SawyerTed

The lumber on your rack looks good.  

Is the black on the remaining lumber mildew/mold?  
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

thecfarm

I see you been a member for 10 years.
And have spent 19 minutes on The Forum.  :(  

I have a sawmill, but do not sell lumber. 
I have sold logs to the sawmill. I have a tractor with a 3 pt winch and I use to cut down trees and sell logs.
But that is hard to do too, if cutting a truck load. Those mills like the logs fresh and when I was cutting logs and working a full time job, does not leave much time for the wife.
There is a member that trucks his own logs to the sawmill. That would work better for me. Cut 10 trees and haul it to the mill.
But there are members that sell lumber and make money at it.
Just like all walnut trees are worth $10,000.  ::)
Model 6020-20hp Manual Thomas bandsaw,TC40A 4wd 40 hp New Holland tractor, 450 Norse Winch, Heatmor 400 OWB,YCC 1978-79

Southside

How long are you logs lying around before you saw them? How long is your lumber dead stacked before stickering?  Are you getting good air flow through your lumber stacks? 

Bees are cheap, you can even get paid to get into them.  Start with swarms, you can set swarm traps and catch them.  In the spring folks will pay to have you come and remove swarms, if you screw up and the hive fails all you have lost is some time and gas.  I started with boxed bees and lost every single one for a couple of years, then I learned about swarms, the fact they have reproduced early in the season with no human input means they are adapted and are survivors, unlike the soft, friendly, inbred, boxed bees out there.  

Back to the sawmill.  The only fight you will always loose is the one you quit. 
Franklin buncher and skidder
JD Processor
Woodmizer LT Super 70 and LT35 sawmill, KD250 kiln, BMS 250 sharpener and setter
Riehl Edger
Woodmaster 725 and 4000 planner and moulder
Enough cows to ensure there is no spare time.
White Oak Meadows

Ianab

Quote from: championyouk on October 17, 2023, 04:09:06 PMFighting the pine beetles and black marks appears impossible. I've tried a bunch of stuff and in the end I more or less lose half my boards. It's black right off my mill,


Sounds like you are trying to salvage beetle killed trees? The beetles have killed the tree, probably when stressed by drought or overcrowding in the forest. Fungus and staining soon sets in with pine (it's not very durable). A stained log is going to produce stained boards. Then pine is basically a "commodity" wood, not high value unless it's something really special. If you have no market for stained wood, push those into a pile and just let them rot. 

Do you have healthier trees to harvest? Get them before they actually die and stain, which will produce better wood, and still allow fresh regrowth of new trees. Also time of year can make a difference to staining. Warm humid weather means slow drying but fast fungus growth, even fresh pine can stain before you can get it air dry. Many in Nth America prefer to saw in Winter because cold stops the fungus, and the wood gets partly dry before the weather warms up. 
Weekend warrior, Peterson JP test pilot, Dolmar 7900 and Stihl MS310 saws and  the usual collection of power tools :)

YellowHammer

If it's black off the mill as you say, then it's black in the log, and that means the logs have already significantly degraded.  If they have bugs too, then that's strike 2 if you want to practice sawing, but strike 3 if you are wanting to sell them.

It's a hard lesson to learn, but a sawmill can't fix moldy, buggy logs.    

You can't make good lumber of bad logs, no more than you can make good steak out of moldy hamburger.

I would say your first step is to stop sawing and start sorting.  Clean, white, non degraded logs go into one pile, all the others go into the other, which is pretty close to the burn pit.

It's a bad day at the sawmill.  I've had them, and all you can do is walk off or wade in.

Quote from: kkcomp on October 17, 2023, 06:42:51 PMGot to Youtube and watch every video on Hobby Hardwoods. Then watch the 5 or 10 more times. After that you may not be getting rich but you will make a much better product and enjoy yourself more.
I agree, I know the owner of that company, what was it? "Hobby Hardwoods?" He's kind of a crotchety old smart aleck, but he tries to tell it like it is...
YellowHammerisms:

Take steps to save steps.

If it won't roll, its not a log; it's still a tree.  Sawmills cut logs, not trees.

Kiln drying wood: When the cookies are burned, they're burned, and you can't fix them.

Sawing is fun for the first couple million boards.

Be smarter than the sawdust

Andries

LT40G25
Ford 545D loader
Stihl chainsaws

GAB

W-M LT40HDD34, SLR, JD 420, JD 950w/loader and Woods backhoe, V3507 Fransguard winch, Cordwood Saw, 18' flat bed trailer, and other toys.

customsawyer

You said a couple of things that says a lot to me. First you mentioned that the logs were beetle killed. This tells me that the beetles have brought bacteria into the logs and they are going to have stain in them before you even put them on the mill. Second you mentioned they were stained coming off of the mill. If this is true than they are not going to turn bright as they air dry. In looking at your one picture in your gallery, I would also recommend doing your stacks a little different to increase air flow. Mainly putting it in a area with more air flow and in a narrow stack, no more than 4 ft wide. You seem to have your scraps piled just to the left of the lumber and that is reducing the air flow through your lumber. Also keep all the grass and weeds short in the area so they don't restrict your air flow. All of this is worthless if the logs are stained before or as you sawed them. The stain is already there and will only get worse during the drying.
Two LT70s, Nyle L200 kiln, 4 head Pinheiro planer, 30" double surface Cantek planer, Lucas dedicated slabber, Slabmizer, and enough rolling stock and chainsaws to keep it all running.
www.thecustomsawyer.com

maineshops

Get creative. I had a nice cherry log. 22 in at the butt. When I opened it up there were white flecks the the size of my thumb nail every few inches.. I tell folks that is rare snowflake cherry.
I cut fore the love of the game so advising folks on how to get rich at it isn't what I can do. Dan
Phil:4, 13

kkcomp

Quote from: YellowHammer on October 17, 2023, 08:13:26 PM
If it's black off the mill as you say, then it's black in the log, and that means the logs have already significantly degraded.  If they have bugs too, then that's strike 2 if you want to practice sawing, but strike 3 if you are wanting to sell them.

It's a hard lesson to learn, but a sawmill can't fix moldy, buggy logs.    

You can't make good lumber of bad logs, no more than you can make good steak out of moldy hamburger.

I would say your first step is to stop sawing and start sorting.  Clean, white, non degraded logs go into one pile, all the others go into the other, which is pretty close to the burn pit.

It's a bad day at the sawmill.  I've had them, and all you can do is walk off or wade in.

Quote from: kkcomp on October 17, 2023, 06:42:51 PMGot to Youtube and watch every video on Hobby Hardwoods. Then watch the 5 or 10 more times. After that you may not be getting rich but you will make a much better product and enjoy yourself more.
I agree, I know the owner of that company, what was it? "Hobby Hardwoods?" He's kind of a crotchety old smart aleck, but he tries to tell it like it is...
Love your videos Yellow Hammer. Thank you for taking the time to make them. I pick up something new in each one everytime I watch them. Even if the guy making them is a crotchety old smart aleck.
Why is there never time to do it right but always time to do it over?
Rework is the bane of my existence
Norwood HD38 Kubota B3300HSU Honda Rancher many Stihl and Echo saws, JCB 1400b Backhoe

DanMc

Wait.....  Is @YellowHammer the guy on Hobby Hardwoods?  I looked at profiles and they don't make that obvious, but I'm a blockhead, so it needs to be made obvious.  Both are in Alabama, so that's a big clue.
LT35HDG25
JD 4600, JD2210, JD332 tractors.
28 acres of trees, Still have all 10 fingers.
Jesus is Lord.

championyouk

Quote from: Ianab on October 17, 2023, 07:41:56 PM
Quote from: championyouk on October 17, 2023, 04:09:06 PMFighting the pine beetles and black marks appears impossible. I've tried a bunch of stuff and in the end I more or less lose half my boards. It's black right off my mill,


Sounds like you are trying to salvage beetle killed trees? The beetles have killed the tree, probably when stressed by drought or overcrowding in the forest. Fungus and staining soon sets in with pine (it's not very durable). A stained log is going to produce stained boards. Then pine is basically a "commodity" wood, not high value unless it's something really special. If you have no market for stained wood, push those into a pile and just let them rot.

Do you have healthier trees to harvest? Get them before they actually die and stain, which will produce better wood, and still allow fresh regrowth of new trees. Also time of year can make a difference to staining. Warm humid weather means slow drying but fast fungus growth, even fresh pine can stain before you can get it air dry. Many in Nth America prefer to saw in Winter because cold stops the fungus, and the wood gets partly dry before the weather warms up.
This is 100% what is happening to me. Everything you said is correct. My grandfather would say to not cut pine in the summer.  I'm in NB Canada and the humidity is high.  I guess im salvaging but honestly didnt realize it when cutting. The stains are already there but most don't believe that. I would have switched to a different species if I didn't just cut the 100 logs. All I do is kill the worms and beetles. You can hear them munching away.
None of this happened with the 100 spruce logs. I have so many of these that around around 25 inch base on my land and it's a shame  

championyouk

Quote from: YellowHammer on October 17, 2023, 08:13:26 PM
If it's black off the mill as you say, then it's black in the log, and that means the logs have already significantly degraded.  If they have bugs too, then that's strike 2 if you want to practice sawing, but strike 3 if you are wanting to sell them.

It's a hard lesson to learn, but a sawmill can't fix moldy, buggy logs.    

You can't make good lumber of bad logs, no more than you can make good steak out of moldy hamburger.

I would say your first step is to stop sawing and start sorting.  Clean, white, non degraded logs go into one pile, all the others go into the other, which is pretty close to the burn pit.

It's a bad day at the sawmill.  I've had them, and all you can do is walk off or wade in.

Quote from: kkcomp on October 17, 2023, 06:42:51 PMGot to Youtube and watch every video on Hobby Hardwoods. Then watch the 5 or 10 more times. After that you may not be getting rich but you will make a much better product and enjoy yourself more.
I agree, I know the owner of that company, what was it? "Hobby Hardwoods?" He's kind of a crotchety old smart aleck, but he tries to tell it like it is...
That all sounds pretty accurate to me. I've separated the bad ones but they just keep degrading as you said. I pushed through the first half hoping I screwed something up but during the next 150 boards realized it was in the log. Anything close to the bark layer is already black. Dang rotten burger trees

championyouk

Quote from: thecfarm on October 17, 2023, 07:21:17 PM
I see you been a member for 10 years.
And have spent 19 minutes on The Forum.  :(  

I have a sawmill, but do not sell lumber.
I have sold logs to the sawmill. I have a tractor with a 3 pt winch and I use to cut down trees and sell logs.
But that is hard to do too, if cutting a truck load. Those mills like the logs fresh and when I was cutting logs and working a full time job, does not leave much time for the wife.
There is a member that trucks his own logs to the sawmill. That would work better for me. Cut 10 trees and haul it to the mill.
But there are members that sell lumber and make money at it.
Just like all walnut trees are worth $10,000.  ::)
I signed up when I was enquiring about sawmills but yes i am new. I've cut tractor trailer loads of spruce and sent them to the mill. They give 1500 dollars for 15 cords. I figured the sawmill should make a few dollars more. 

YellowHammer

Quote from: DanMc on October 18, 2023, 11:37:54 AM
Wait.....  Is @YellowHammer the guy on Hobby Hardwoods?  I looked at profiles and they don't make that obvious, but I'm a blockhead, so it needs to be made obvious.  Both are in Alabama, so that's a big clue.
smiley_wavy
Yeah, it's me.  Since I'm a naturally shy, quiet and "blend into the crowd" kind of guy, I get embarrassed by all the Paparazzi that follows me and Chip everywhere.  Thanks for watching my videos.  
YellowHammerisms:

Take steps to save steps.

If it won't roll, its not a log; it's still a tree.  Sawmills cut logs, not trees.

Kiln drying wood: When the cookies are burned, they're burned, and you can't fix them.

Sawing is fun for the first couple million boards.

Be smarter than the sawdust

OlJarhead

Spray them with Borate or brush it on -- they need to be treated to kill the bugs.

'Blue Stained Pine' and 'Bullet Pine' can sell well in the right environment and presented well.

Please show us pics -- hard to say what 'black' is or why it's that way without seeing the pic.

CustomerSawyer is 100% right (and sawn more lumber than most other 10 people):  air movement, air movement, air movement 

I've milled old pine logs that were very stained, so much so they were marbled with it and they were AWESOME!  Dried them right and made all manner of beautiful things including window trim, doors, tables etc.

So, my guess is you need to treat the wood ASAP to kill the bugs, mill the logs asap in sellable widths and dry them PROPERLY (outside, on the shady side of a building in the summer, with LOTS of air movement running through the stacks both through the sides and the ends!  Only cover the top like a roof and sticker that above the last layer too.  I air dry all my pine and never have an issue even with beetles trying my patience ;)

Yellowhammer knows what he's talking about so I agree, watch his channel but remember he's mostly milling hardwoods so may do things a little different than what you might do milling softwoods (just bear that in mind).

Show the pics!

Also, you ain't getting rich owning a sawmill LOL except maybe rich in lumber and sawdust.
2016 LT40HD26 and Mahindra 5010 W/FEL WM Hundred Thousand BF Club Member

DanMc

Quote from: YellowHammer on October 18, 2023, 02:51:56 PMI get embarrassed by all the Paparazzi that follows me and Chip everywhere.  Thanks for watching my videos.


Wow, this forum is filled with famous people, with Hobby Hardwood and @OlJarhead here.  I'm surprised they still let me in.  Now I'm wondering if @Northwest Sawyer is lurking in the shadows here.

Seriously, I am grateful that there is such a depth of knowledge here to help the noobs.  And then there's the magician!
LT35HDG25
JD 4600, JD2210, JD332 tractors.
28 acres of trees, Still have all 10 fingers.
Jesus is Lord.

OlJarhead

LOL I wouldn't go that far ;)

But yes, there are people here that are amazing and experienced beyond reconning (and I'm not amongst them when it comes to the experience they have!!!!) It would take all day to list them all and I've learned from ALL of them!

I don't think Jason (Northwest Sawyer) is on here though.  I've tried to get him over here but he's a busy guy ;)  Heck, aren't we all (I can spend 40hrs a week editing, in fact I'm editing now and just saw this as FF is often there in the background).
2016 LT40HD26 and Mahindra 5010 W/FEL WM Hundred Thousand BF Club Member

Thank You Sponsors!