Making it thrugh another year, '24-'25

[doc henderson]

There is a "white" Avalanche pickup in the background in pic # 2.

[SawyerTed]

Tom, how long does a mushroom log produce?  

[doc henderson]

Tom, can you saw some of the bigger diameter logs in half.  make a stable base some may like and get two to sell.  does that reduce the sugar and growing potential in any way?

[Old Greenhorn]

Doc yes I can, in fact I offer this to every client as they pull in to load and also tell them they can pick their logs (within reason) by passing the ones they don't like. But understand that growers have to handle and stack their logs in some way. Many use the log cabin style to use a small footprint and still get maximum air flow. SO having all the logs the same length makes that workable. Others are more flexible. Logs 'last' as long as the nutrients hold out and they do not get completely dry inside. This is why they are stacked in cool, shady places, preferably by moving water. As we all know, logs dry fastest from the cut end. So yeah, cutting in half will shorten effective life, but I can't say by how much. I don't think its a lot on large logs. Think about how long a 2' long chunk of fresh and green red oak would take to be burnable without splitting. It's quite a while.  Which leads to Ted's question. It's a function of drying time and how much nutrients and sugars the log contains. So an 8" oak log 40" long may last up to 5 years if cared for properly, but will likely beginning to show less yield after 3 years or so.
 Commercial growers will rotate in new logs every year or so and rotate out the poor yielding or 'dud' logs.
 One year I did cut some special order logs for a client that were 10-14" diameter and 40" long. Those near killed me. But he was using the to grow Lion's Mane in a totem log arrangement. The logs weighed in around 100-150 pounds. But totem logs get 'plated' upright and don't get moved. The log is prepped much differently. You can google it I think and find examples, there is a wide variety of techniques owing to the fact that there is much not known about mushrooms and what is 'best'.

[doc henderson]

I meant length wise so they could have a flat bottom with inoculants on the upper half-moon side.  so, a 3-foot log would make two 3-foot half-moon pieces.  sell as two logs from a larger diameter log.  you have a sawmill.    Do not get Howard started, or he will have you standing them up to trim the ends on the sawmill!

[beenthere]

If length-wise would work for the mushroom growers, then seems that slabs from sawmills would/could also work. Slabs meaning "first cuts" to square up the logs. My good friend that grew shitake mushrooms liked 4' lengths of 4-5" diameter oak. His process included periodic soaking in water tank to apparently keep moisture in the oak. Point being that he wanted wood that he could easily move around by hand, i.e. I'd guess about 75 pounds.

[Old Greenhorn]

Sorry, lengthwise is pretty much a non-starter. The log would dry quickly cutting any effective life by 70% or more. I suppose you could play around with arborseal and such, but that just adds more work, maintenance, and cost. Of course, anybody is welcome to do a test study and let us know how it goes.
 
 Certain strains of Shiitakes will accept 'forcing' which is done by soaking either in a tub, stream, or shower. This simulates a heavy spring or fall rain and 'forces' the mushrooms to go active and fruit. Using this technique, a grower can do a certain number of logs, wait 1 week, then do another group, wait one week, etc. Eventually, there are enough logs in the cycle that each group will fruit one week apart. The logs require a months rest (IIRC) after harvest before they can be forced again. So if you have enough logs to do 8 weeks worth of log groups, as you as you complete one full cycle, you can force the first group again.

[Old Greenhorn]

Well catching up here a little, on Tuesday my first client came for pickup. They ordered 250 logs, I had 270 on the deck, but I always allow clients to pick or reject logs by their needs, within reason. Any clean log between 4 and 6" diameter should be good, those bigger and smaller or ones with a slight hollow heat may be reject for some or takers for others. It always has worked out fine in the past so I don't 'force' anybody to take what they don't want unless of course they specifically asked  for it, then decide when they see it that it's too big or small. Tod bad, that's what you asked for, I cut it special, you just bought it.
 So the folks on Tuesday only left with 200 logs. They had taken a bunch of large ones, but they could only work with so many of those and all I had left were large logs up to 9 or 10". The other reason was they were pretty much out of room in the dump truck.  But they have no problem coming back for the last 50 whenever I have them ready, they enjoy the trip and getting out of the city. 2 days later now and I already pretty much have those 50 ready to go. Probably done tomorrow. Also with what they left I had enough logs that meet the needs of my next client, so he is coming up Tuesday to get them. It all works out. Funny thing. When I cut up the trees and I run my 40" marks down the truck I keep going until I am down to about 3" sometimes a tad less. Now I know these are too small for mushrooms and they are too large for broom handles, but I cut them and throw them in anyway figuring I will make them into firewood. But I throw them on the stacks at home because al these folks who teach sometimes like to take a few small ones for kids or the elderly folks. I usually throw those on for free. But these folks Tuesday took just about every undersized 'log' I had. So you just can't figure some folks out.
 Tuesday was so nice that after I ran my errands in town I grabbed my book and sat in the sun reading even though I should have gone back to the woods.
 Wednesday I went down and did another 20 log load and some other chores. Today I went down and put another 20+ on the ground, cut to length and brush work all cleared up, but I didn't haul them out. I will do that tomorrow combined with a couple more trees. My buddy Bob was coming by and I didn't want to be late or keep him waiting.
 Bob dropped me off a 'gift bucket' which contains (I hope   ) all the parts to make a 372 including some extras. It should be a fun project I am not going to rush into, I will enjoy it and have some fun with it.
---------------------------------
So I mentioned a few weeks back I think that I got this request from a writer to be interviewed for her newspaper as well as some other things. I donated one of my stools the the fundraiser auction for the John Burroughs Woodchuck lodge and we have been corresponding about that, the Burroughs Biography I was reading and other stuff off an on for a week or so. Today I got a large envelope in the mail with the latest issue of the paper. It is an advertising newspaper and contains two major articles in each issue. One is local history and the other seems to be a personal interview. I like the writing and the articles are well researched and thorough. So we'll see how this goes. Ironically, the feature article in the current issues is about Julian Burroughs, John's son, who was just as interesting as John but much less well known. It will be interesting to see how this interview goes. I keep telling her to keep her expectations pretty low and have a backup subject handy. She read my 'writings' on my web page and somehow thinks there is something there, but I just don't know.

 Back into the woods tomorrow for another day.