iDRY Vacuum Kilns

Sponsors:

4.1 earthquake in East TN 5-10-2025

Started by Machinebuilder, May 10, 2025, 07:19:08 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Machinebuilder

This was interesting.
At 9:04 AM a 4.1 earthquake hit about 10.5 miles from my house.
the epicenter was just off hwy129 a little east of Foothills Parkway (along Chilhowee lake).
This is pretty much a wilderness area and there is no reported damage.

I was in my shower and heard a rumble and the house shook.

Its probably the strongest earthquake I have felt and the first in a very long time.
Dave, Woodmizer LT15, Husqvarna 460 and Stihl 180, Bobcat 751, David Brown 770, New Holland TN60A

Magicman

Yes interesting for sure and a sorta long way from the New Madrid area where they had predicted the next quake would be.

I am glad that you are OK.   
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

SawyerTed

Several years ago, 2020, we felt the 5.1 earthquake that hit Sparta, NC.   That's probably 60 miles from here.  I was in bed and it seemed like a prolonged really strong rumble of thunder.  Yes the house shook.  Sparta had damage we didn't.    
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

SwampDonkey

The last quake I felt here was around '82. 5.7 magnitude, but centred in the most remote area of the province. But there have been quakes around this region quite frequently, usually 2-3 mag.

https://earthquaketrack.com/r/new-brunswick-canada/recent

Glad everything is still intact down your way.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Ianab

Richter is a scale of the overall size of the quake (total energy released). It's not always the same as how violent the local shaking is. Another scale is MMI, which judges the level of shaking. 

So you can get a deep quake, of Mag 6 or so, that's 50 miles down. Felt over a wide area, but little damage. The Christchurch quakes only measured ~6.x, but were only a mile to 2 below the city. That had the MMI up to 8 or 9. Those would have been a MMI 4 here, but I'm 580ks away. Locally people actually got knocked over or thrown into the air, which is up around MMI 9 or 10. Scale technically goes to 12, but at that level everything flattened. 

We had Aussie visitors at the time, and I think it was their first actual quake. They were a bit freaked out. Locally you judge the shaking, and if it's mild but extended, you assume it's a big quake, but miles away. If it's small and local, it will be sharp, but short. If it's BIG and LOCAL, well everyone in this house knows to dive under one of my computer desks.  ffcheesy
Weekend warrior, Peterson JP test pilot, Dolmar 7900 and Stihl MS310 saws and  the usual collection of power tools :)

Machinebuilder

East TN is not related to the New Madrid fault, its next to the Mississippi River

There is an east Tennessee seismic Zone that sort of follows the Tennesee river valley.

The Source of the seismic activity is unknown.

I see something in the news about small quakes in the area but this is the biggest i have felt.
 the depth was 15.5 mi. I am not finding any MMI info

Dave, Woodmizer LT15, Husqvarna 460 and Stihl 180, Bobcat 751, David Brown 770, New Holland TN60A

SawyerTed

Our region, Tenn., Georgia, SC, NC and Va, annually have dozens and dozens of earthquakes.  Rarely above a 4.0 on the Richter scale.  Most are below 2 and never felt.  The occasional 5 plus happens and will crack a chimney or topple unsteady stuff in very spotty areas. 


Here's the distribution map.  It shows what Machinebuilder is mentioning. 
Woodmizer LT50, WM BMS 250, WM BMT 250, Kubota MX5100, IH McCormick Farmall 140, Husqvarna 372XP, Husqvarna 455 Rancher

Magicman

I saw a map last evening that showed another smaller seismic zone North of the New Madrid zone, so Tennessee has 3 zones.  Anyway interesting stuff.
98 Wood-Mizer LT40 SuperHydraulic    WM Million BF Club

Two: First Place Wood-Mizer Personal Best Awards
The First: Wood-Mizer People's Choice Award

It's Weird being the same age as Old People

Never allow your Need to make money
To exceed your Desire to provide Quality Service

SwampDonkey

Years ago before my time a quake hit and it lowered one side of the old rock foundation by 2" in great grandfather's house. I don't think there were any instruments to measure it back then.
"No amount of belief makes something a fact." James Randi

1 Thessalonians 5:21

2020 Polaris Ranger 570 to forward firewood, Husqvarna 555 XT Pro, Stihl FS560 clearing saw and continuously thinning my ground, on the side. Grow them trees. (((o)))

Thank You Sponsors!