iDRY Vacuum Kilns

Sponsors:

Disston and Titan-Any parts crossover?

Started by Chris J, November 10, 2005, 01:19:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Chris J

November 10, 2005, 01:19:19 PM
I recently won a Disston DA211 on eekBay, and I'm eyeing a Titan 40 for the bar & chain, and maybe other misc parts.  Is there any parts crossover between the the two saws?  This' is my first saw this big and this old, well, except the old David Bradley that I never bothered to work on.  An IPL for the DA211 would certainly be useful.


Your insight and help is appreciated!
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.

Chris J

#1
November 11, 2005, 08:59:40 AM
Anyone with info?  Crofter? Al? Bill? Mike?

Please.
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.

Chris J

#2
November 12, 2005, 11:00:34 PM
 :o
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.

Chris J

#3
November 18, 2005, 01:42:41 PM
Mr. Lewis Brander answered my question, but the news wasn't good  :'(.

Be careful, & aw ra best...Chris J.
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.

Jeff

#4
November 18, 2005, 02:01:28 PM
I take it the answer was there is no cross over?
I can change my profile okay. No errors. If you can,t remove all the extra info in other fields and try.

Chris J

#5
November 20, 2005, 12:50:37 AM
No, no parts crossover.  Two different manufactorers, different specs.  So much for wishful thinking.

Be careful, & aw ra best...Chris J.
Certified Amateur Chainsaw Tinkerer.  If sucess is built on failure, then one day I'll live on the top of Mt. Everest.
Print
Go Up Pages1
User actions

Thank You Sponsors!