iDRY Vacuum Kilns

Sponsors:

Milling Posts for Barn

Started by vfauto, June 12, 2011, 12:50:46 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

vfauto

I am building a barn and need some post for the large overhangs.They will be 6x6 and 4x4s.I do not need many but my question is how should they be cut from the log or could someone post a diagram as to how they should be cut out of the log. The other question is can I install them green?
The definition of insanity is to do the same things over and over and expect a different result!

paul case

i think it is a plus to have the heart boxed on 6x6. the 4x4 will bw e little harder to box the heart but if you dont ,on oak anyway, they will sometimes bow.



we used 6x6 boxed heart post oak on dads barn. pc
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

vfauto

Can you difine boxed heart please?
The definition of insanity is to do the same things over and over and expect a different result!

Chuck White

Quote from: vfauto on June 12, 2011, 06:01:36 PM
Can you difine boxed heart please?

Just means put the center of the log (the pith) in the center of the 6x6.
~Chuck~  Cooks Cat Claw sharpener and single tooth setter.  2018 Chevy Silverado and 2021 Subaru Ascent.  2020 Mahindra ROXOR.
With basic mechanical skills and the ability to read you can maintain a Woodmizer  LT40!

Tom


Jim_Rogers

In order to make sure you have the center of the tree, the pith/heart in the center of the posts on both ends you have to plan your last cut first.

Here is a story I wrote about doing that.

http://www.forestryforum.com/board/index.php/topic,35730.0.html

I hope that helps you..

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

SamB

If you have logs large enough that allow you to saw heart free posts would that be a better post than a pith centered post?

Jim_Rogers

Quote from: SamB on June 13, 2011, 08:16:11 AM
If you have logs large enough that allow you to saw heart free posts would that be a better post than a pith centered post?

SamB:
I did a write up of an experiment that I did with a large log.

Here is the link to that story: https://forestryforum.com/board/index.php/topic,4247.0.html

I hope that helps you some....

Jim Rogers
Whatever you do, have fun doing it!
Woodmizer 1994 LT30HDG24 with 6' Bed Extension

SamB

Thanks Jim, a lot of good info in that link as always when I see your name as the originator ........Sam

sst04

Quote from: paul case on June 12, 2011, 02:03:55 PM
i think it is a plus to have the heart boxed on 6x6. the 4x4 will bw e little harder to box the heart but if you dont ,on oak anyway, they will sometimes bow.



we used 6x6 boxed heart post oak on dads barn. pc


Not to hijack the thread, but what is that painted on the base of those posts?  Something to keep them from rotting?

paul case

that is cement from the cement mixer. this is my dads barn and he is picky. all of them are burried 3'. the posts werent treated with anything.
he says it will last him a lifetime if he dies when he should.
we had an old 1940'ish pole barn at the old home place that fellin during the ice storm of 07 because some of the concrete had deteriorated and a footing(stemwall) fell over. the poles were post oak and hadnt been sawed. just trees. they were stil good and hard. pc
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Thank You Sponsors!