modding my 390 Husky

[AdkStihl]

[Cut4fun]

He's like that Jeff.

Has his own hive but his stupidity ran all 75 members  off   :D  and the other half owner. So now there is only cheech and chong to talk back and forth with.  :D
Which lead to little queen b leaving her hive seeking others for approval.  :D  :D :D

[MakitaCS]

Just here to move the rook before the queen slaps both Grumpy and Redneck :D

I should show up to Chardon someday and show both of you how to run a saw, . And build one too! Those cookies look thin and fell right on top each other...

http://youtu.be/nIVD423DZ4I

[AdkStihl]

Dude....youre a joke. Quit poluting this place.

[Al_Smith]

Hmm I thought he went away,guess not . :(

Well Ricky is getting better it used to take him a few weeks to annoy people .Now he can go from a general nuisance to a gigantic pain in the rear in about 3 milliseconds.

Young Ricky doesn't get the concept of hotsaw racing east coast style .It's a cold start run ,8"poplar cant 18" off the ground .Not a round piece of balsa wood 6 inchs in diameter clamped 3 feet in the air in a log splitter with the saw running at the onset .

As far as Chardon Ohio ,it's one of the premere exibitions of it's kind in the USA .These are the best you'll find anywhere .I ran once and honestly didn't do that well but it was fun .The other guy Ricky is mealy mouthing won the 3 cube class one year .

Ricky is going to wear himself out patting his own back but he never got the idea that there's more to chainsaws even the racing portion than an egomaniacs toutings .--if you always do what you've always done you'll always get what you always got ---

C'mon Ricky put another 500 vid clips on .I know you've got them . :D

[Jeff]

Somebody wanna send me a note and fill me in on what is going on in this topic?

[1270d]

Seems like they are bringing a rivalry from another forum.

[Jeff]

MakitaCS, from my information gathering, it seems like the reasons you are here posting your videos all of the sudden may not be for reasons I would appreciate. Care to set my mind at ease with a thoughtful reply?  I'm not real happy with the smell of an extremely lean twostroke oozing out of this board and into my report to moderator emails. I like it best when I only have to stick my head in here to find an answer to a personal chainsaw question.

[MakitaCS]

I dare redneck to put on a show of a hot ported 390 with a 20" bar wrapped with a non fresh LGX chain, freshly filed though, and see if it will pull as many revs as Orange Bang does when pulled into seasoned oak. It's got to go just as fast with no hesitations in rpm drop...too many saws I see have hesitations in them 

Good luck...

[Jeff]

MakitaCS, since you have chosen to ignore me when I asked you a question in order to help me make a fair moderation decision, I can only rely on all the other information I have collected.  You won't be reading this as you are being banned from this forum as I have decided you are not here for any good intentions. If I see any attempt by you to circumvent this ban, I will find you and stomp you. Believe it. Count on it.

[John Mc]

Thank you, Jeff.  One of the things I like about this forum is that we're not all trying to out-macho each other all the time. 

Sometimes, little humility goes a long way.

[ladylake]

Right, most of us run normal saws and it irks me when someone tells  us to run a saw at a kizzilion  rpm on edge of burning up.  Steve

[Cut4fun]

Right, most of us run normal saws  Steve

Thats something I learned too. 99% of the people run stock to muffler modded saws only.
All my customers want in a saw is one that starts, stays running and has sharp chain.  8) 

They think the ported stuff is neat but thats where it stops and not needed to cut wood.
Heck I even noticed the wood dont care or complain that it takes me a few extra seconds to cut it with my stock saws.  :D :D

[NCFarmboy]

While doing a little carb research I came across sonething interesting on the 390.  Now uses a Walbro WJ-118 carb instead of the Tillotson HS.  WJ-118 venturi size is 17.46.  365XT and 372XT RWJ-4 venturi size is 19.05mm.  The RWJ-4 would be a direct swap.  Larger carb may work well with MM and WPort.
Shep

[AdkStihl]

MakitaCS, since you have chosen to ignore me when I asked you a question in order to help me make a fair moderation decision, I can only rely on all the other information I have collected.  You won't be reading this as you are being banned from this forum as I have decided you are not here for any good intentions. If I see any attempt by you to circumvent this ban, I will find you and stomp you. Believe it. Count on it.

smiley_clapping