iDRY Vacuum Kilns

Sponsors:

LT40 Bearing Site-Hose Size?

Started by Ga Mtn Man, April 25, 2017, 09:24:19 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Ga Mtn Man

April 25, 2017, 09:24:19 AM
What size is the clear site hose on the main bearing of an LT40?
"If the women don't find you handsome they should at least find you handy." - Red Green


2012 LT40HDG29 with "Superized" hydraulics,  2 LogRite cant hooks, home-built log arch.

paul case

#1
April 25, 2017, 09:30:11 AM
Mine is 3/8''.

PC
life is too short to be too serious. (some idiot)
2013 LT40SHE25 and Riehl edger,  WM 94 LT40 hd E15. Cut my sawing ''teeth'' on an EZ Boardwalk
sawing oak.hickory,ERC,walnut and almost anything else that shows up.
Don't get phylosophical with me. you will loose me for sure.
pc

Ga Mtn Man

#2
April 25, 2017, 09:33:28 AM
Expect mine is too.  Thanks PC.
"If the women don't find you handsome they should at least find you handy." - Red Green


2012 LT40HDG29 with "Superized" hydraulics,  2 LogRite cant hooks, home-built log arch.
Print
Go Up Pages1
User actions

Thank You Sponsors!